Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Problem Solvers Braze-on Light Mount
$19.99
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
No Image
$4.99
- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack
CatEye Helmet Mount
$12.00
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
TwoFish Twofish Flashlight Holder
$5.95
- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists
Topeak BarXtender
$19.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Sunlite Bicycle Spoke Light
$9.99
• 2 LEDs with 3-color variable automatic flashing • Attaches to the spokes on your wheel so it spins for high visibility • The Spoke Light is ready whenever you're riding • It turns on/off automatically when it's dark/light
Sunlite Replacement Light Straps
$4.99
- Replacement mounting straps for Sunlite lights - Choose specific model to fit your light
Sunlite TL-L225 Bracket
$2.79
- Rack mount bracket only - Fits TL-L225 taillight
Specialized 2amp International USB Charger
$40.00
2amp charger for the fastest charging possible of Specialized Flux lights - Has 2 standard size USB ports and will charge most USB devices. - Includes 4 interchangeable wall plug options and USB A to USB MINI B male to male charge cable. - Output: 10.5W 5V 2.1A Max Input: 100-204V AC 50/60Hz. 260mA
Specialized Flux 900/1200 Headlight Helmet Mount
$20.00
Looking to take your second-generation Flux headlight off-road? You're going to need a helmet mount. - Breakaway design prevents snagging on overhead objects - Hook-and-loop strap can be reoriented 90 degrees to give additional mounting options - Fore/aft adjustability for optimal placement regardless of helmet vents - Action camera style hinge works with third-party mounts
Specialized Flux Elite Headlight Handle Bar Mount
$30.00
All the parts needed to mount a Flux Elite headlight to a second bike. - Includes axle, handlebar clamp, stainless screws and 3mm Allen key. - The clamp will fit 25.4mm and 31.8mm bar diameters with included rubber grip pads.
Specialized Flux Expert Headlight Lens
$20.00
Replacement lens for Flux Expert Headlight. - Includes clear lens and gasket.
Specialized Flux Expert Taillight Seatpost Mount
$25.00
Do you have more than one bike? Get the most out of your Specialized Flux Expert tail light (sold separately) by getting an additional seatpost mount for easy switching between your rides. - All the parts needed to mount a Flux Expert taillight to a second bike - Includes mounting bracket, three interchangeable rings to fit different seatpost sizes and a 2.5mm Allen key. - Interchangeable rings will fit 27.2mm, 30.9mm, and Venge Aero seatpost.
Specialized USB A Male to Mini B Charger Cable
$10.00
High-efficiency charger cable for Flux headlights. - High capacity wire can transfer more power with less loss. - Custom "L" shaped Mini USB Male for the best fit to Flux headlights. - NOTE: This is a CHARGE ONLY cable and cannot be used for data transfer.
Problem Solvers Front Rack Light Mount
$7.99
-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter
Portland Design Works StayPutNik Tail Light Bracket
$6.00
The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot
Portland Design Works Tail Light Bracket
$6.00
Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays. - Seat post and seat stay brackets - Rubber shims included for a custom fit - Compatible with all PDW tail lights except Asteroid and Fenderbot
Portland Design Works Tail Light Rack Bracket
$6.00
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
Planet Bike BRT Strap Light
$14.99
Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.
Planet Bike Quickcam Adjustable Handlebar Bracket
$5.99
- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot
Planet Bike Rubber Mount Tail Light Bracket
$5.99
- Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light
Origin8 Eyelet Stub Light Mount
$11.59
Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.
NiteRider Adjustable Angle Tail Light Strap Mount
$9.99
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for their flagship tail light, the Sentinel. It allows you to fine tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It’s an easy-on and easy-off non-slip tail light mount that also features a grooved contact pad that makes this the ‘go-to’ mount for riders using aero seatposts. - Fits standard and aero seatposts System Compatibility: - Sentinel - Solas - Sabre - CherryBomb
NiteRider Explorer Headband Mount
$29.99
The Explorer headband adjusts to various head shapes and sizes. System Compatibility: - Explorer 350 - Pro Series - HID Series - Classic Plus & Seclect - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
NiteRider Handlebar Strap Mount
$9.99
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
NiteRider Lumina Stick-On Mount
$14.99
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Mount it to your favorite downhill/MX style helmet, or explore the versatility of your Lumina headlight by mounting it onto an industrial hard hat. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
NiteRider Micro USB Cable
$6.99
USB cable for USB rechargeable batteries. System Compatibility: - Lumina Series - Lightning Bug 120 USB - Sentinel 2W USB - Solas 2W USB - Stinger USB
NiteRider Tail Light Strap Mount
$7.99
The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seatposts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it’s time for a recharge.
NiteRider Taillight Rack Mount
$9.99
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
NiteRider Taillight Seat Stay Mount
$4.99
Taillight Seat Stay Mount
Page 1 of 2 Next page