Accessories

- Creates a dry ceramic coating for increased durability and performance in dry condition - Excels in dry and dusty conditions - Biodegradable - Integral UV tracer dye and UV torch to aid accurate application and ensure total protection

The multifunctional Urban Back-Roller is an ideal single bag for bike riders who are looking for a spacious, waterproof bike bag to accompany them on their way to work or school. Made of a special blend of Cordura fabrics, the bag has a textile appearance that is a perfect match for both casual and business attire. Thanks to a polyurethane coating on the inside, it is nonetheless absolutely waterproof. The practical QL mounting system enables you to quickly and conveniently attach the bag to your bike rack. The bag's internal pocket, consisting of a main compartment and a zippered mesh compartment helps you to keep things orderly and immediately accessible. A detachable shoulder strap allows you to comfortably carry the Urban Back-Roller once you set off on foot. - Classical rear pannier (single) with roll closure - Sturdy soft-touch PU-laminated Cordura blend - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch function preventing abrasion on the rack - Integrated inner pocket and shoulder strap - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Ideal for shopping, sports, picnic etc. - Two highly reflective 3M Scotchlite reflectors - Can be easily cleaned inside

Add a little flair and extra visibility to your ride. A Saddle Charm adds character to the tail of your whip! Made of our woven handlebar tape, a sturdy thread locking loop, and highly reflective 3M trim, our Saddle Charms can be attached to the rails of your saddle, the bag loops on a Brooks England saddle, or just about anywhere on your bike or bag for a pop of added safety and fun. They may even give you a bit of extra luck.

Made from high precision, hardened Cro-Moly steel, Park's Bottom Bracket Tool (External Bearing) can be turned with a 3/8" drive wrench, 1" wrench, or Park Tool FRW-1 Freewheel Remover Wrench (each sold separately).

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

- Contains 2 Mudflaps and Quick-Snap attachments - Compatible with: ATB Hardcore and SpeedEZ fenders (sold separately) - For use with 60mm width fenders (sold separately)

Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.

- Take your recovery to a whole new level - 20 grams of Plant based Protein - Whole Superfoods, Chia & Flax Seeds - Omega-3, fiber, and antioxidants for digestive health and more

- Offers internal rust protection for steel frame bicycles - Enough rust-inhibitive coating for several applications - Law prohibits ORM-D materials from shipping by air

For the rider who wants to protect the toptube region of their frame. Perfect for preventing damage from knee pads, shoes, bike locks and storage. Toptube protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the toptube of the bike to protect it from knee pads, cleats, and bike locks during storage. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models and sizes - The Essential Toptube Kit includes protection for toptube and extra pieces to provide approximately 10% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

Rear Shock Service Kit Full- Monarch With Autosag Specialized B1

RockShox Motion Control Compression Dampers

Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post

Vivid/Vivid Air internal floating piston spring compressor

Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.

Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes.

The Velo 65 Mountain 29 is an ideal front and rear fender retro fit kit for 29" mountain bikes. Its practical universal mount makes it easy to securely attach to a wide range of bikes. The included U-stay kit provides fender stability. Suitable for tire widths up to 2.35". - Features a safety release on the stay mount

The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber

The Anything Cradle is designed to be a superior solution to the dry bag and strap or handlebar rolls that folks have been accepting for years. The placement of the Anything Cradle holds your gear away from your bars. This creates room for cables and housing without fear of kinking, stressing, or otherwise damaging them. Your cockpit is free to remain adjusted as you prefer. - Materials: Nylon 6/6 composite cradle, 6061 forged aluminum arms - Construction Methods: Injection-molded cradle and forged arms Features - Modular system, use Salsa's EXP Series Dry Bags for the perfect carrying system or your own dry bag with a ladder strap system - Works with or without front pouch - “Ladder Lock” 3-slot strap weave design that eliminates straps from slipping - Extremely versatile - Weight: 420g with hardware - Max. Load Weight: 8 lbs (3.7 kgs) EXP Series Anything Cradle Front Straps Anything Cradle Straps are the perfect width for Salsa's Anything Cradle, but can also be used to strap stuff down on racks or wherever the heck you want to strap stuff. They cinch tight but easily release tension with a push of the buckle. Carry a couple with you for your planned or unplanned strapping needs. - Materials: 25mm nylon webbing, Duraflex hardware

SaltStick Caps are full-spectrum electrolyte capsules that have been engineered to replace sodium, potassium, calcium, magnesium, and chloride lost in sweat, in a form and quantity that your body can use. The buffered salt composition also helps digestion and absorption, with a recommended dose of 1-2 capsules per hour. These unique capsules help minimize muscle cramping and heat stress during training and endurance events. Vitamin D has been added to aid in calcium absorption by the body. The capsules are vegetarian, gluten-free, GMO-free, and contain a balanced and buffered mixture of electrolytes with nothing unnecessary added. The formulation provides unparalleled support for challenging conditions, and have been used to help athletes win major endurance events worldwide.

- Ball-inflating needle for footballs, basketballs and more

• 35.5-inches x 79-inches • Black

Surly Big Dummy Frame Stickers/Decals - For repair, repaint or whatever - Dry transfer style - Headbadge included

Insulated bottle holder with Swix 16oz bottle included. Mesh zippered pocket with reflective piping. Padded mesh back for breathability, clip waist strap.

Add a touch of Teravail to your ride with these bottles. - BPA-free plastic - 100% FDA food-grade materials - Non-solvent base (UV cured) CPSC-approved ink - Volume: 22 oz

A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks